|
#1
25th July 2010
|
|||
|
|||
hole in line
i have a small scrap about 1 inch long, there is a small leak, nothing major, do they make somthing like 1 ptc on each side or what the heck is the thing called LOL its early forgive me
Would something like this work? http://www.summitracing.com/parts/SUM-901031/
__________________
 1994 GMC Sierra 1500
5.7L V8 Cat Back Straight Pipes Shocker S4 XL Nathan AirChime K5LA 12 Gallon Tank Dual Viair 444c Hornblasters 100W PA/Siren Watch my Vids on YOUTUBE 
|
|
#4
25th July 2010
|
|||
|
|||
|
What PSI are you running? I have those in elbows, but they are only rated for 150 psi. They work great though.
__________________
2005 Dodge Dakota SLT Quad Cab V8 4.7 4x4 Shocker Classic 127VX Train Horn Kit 1/2" K3L 150psi 8.5 Gallon Tank 2 400C Viair Compressors My Dodge Dakota Install
|
|
#6
26th July 2010
|
||||
|
||||
|
Time to upgrade to 5/8" OD line
__________________
I own a Dark Blue Metallic , 2006 Silverado Ext. Cab, Z71, 5.3 H.O., w/ - Horn Blasters HB4H (shockers) Train Horn - hooked to the alarm. And a K3LA on 5/8" OD line controlled by GW valve. 10 Gal of air @ 150 psi. Flowmaster dual super 40 american thunder series exhaust, Wait4me 93 octane tune, K&N FIPK - and many other mods!!! 
|
|
#7
26th July 2010
|
|||
|
|||
|
Quote:
but dont wanna have to buy new valve/hose/fittings/etc :/
__________________
1994 GMC Sierra 1500
5.7L V8 Cat Back Straight Pipes Shocker S4 XL Nathan AirChime K5LA 12 Gallon Tank Dual Viair 444c Hornblasters 100W PA/Siren Watch my Vids on YOUTUBE
|
|
#8
31st July 2010
|
||||
|
||||
|
Re: hole in line
Time for a 5/8 ID Line!!!
__________________
2006 F150 - Nathan Airchime K5HA (modified) 7 gallon tank, DC5000 compressor, GC Xtreme 350 3/4" valve, 5/8" ID air line, viair 110/145  K5HA short burst K5HA sound delay K3LA video
|
|
#9
1st August 2010
|
|||
|
|||
|
Re: hole in line
Quote:
Quote:
__________________
1994 GMC Sierra 1500
5.7L V8 Cat Back Straight Pipes Shocker S4 XL Nathan AirChime K5LA 12 Gallon Tank Dual Viair 444c Hornblasters 100W PA/Siren Watch my Vids on YOUTUBE
|
|
#10
4 Weeks Ago
|
||||
|
||||
|
Re: hole in line
Quote:
I'm doing 5/8" ID hose and fittings from Lowes. They are 1/2" NPT x 5/8" barb fittings. They're around $3.50 The inside of the barb is still smaller than the orifice in the valve. Hey Silvy - weren't those 5/8" PTC fittings really expensive?
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
